Orange Pi One Board Compatible Android 4.4 Ubuntu USB2.0 Port 512MB SD RAM
Orange Pi One with Quad Core 1.2GHz Cortex-A7 w/ ARM Mali GPU, 512MB DDR3, 40 Pin GPIO, HDMI, Ethernet. Orange Pi is a brand of single board computers made for embedded enthusiasts. Powered by the Quad Core Allwinner H3, this board is capable of 4K Hardware H265 Decoding, OpenGL ES, and much more. It runs at a blazing fast 1.2GHz and outclasses the Raspberry Pi 2 while rivaling the Raspberry Pi 3
What’s Orange Pi One?
It’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Rasberry Pi Image. It uses the AllWinner H3 SoC, and has 512MB DDR3 SDRAM
What can I do with Orange Pi One?
Build a computer, a wireless server, play games, music and sounds, HD video, a speaker, etc.
Who’s it for?
Orange Pi One is for anyone who wants to start creating with technology – not just consuming it. It's a simple, fun, useful tool that you can use to start taking control of the world around you.
1.Make sure to purchase a high quality 2A power supply.
2.Software: Please use the Armbian images. They provide the latest community images based on Debian. Do not use the Raspbian image from Raspberry Pi as it is not compatible. Raspbian does not have out of the box support for any board other than Raspberry Pi. Raspbian images for the Orange Pi are based on ARMv6 older code and runs slower on ARMv7 chips like the Allwinner H3
|CPU||H3 Quad-core Cortex-A7 H.265/HEVC 4K|
|GPU||Mali400MP2 GPU @600MHz|
|Supports OpenGL ES 2.0|
|Memory (SDRAM)||512MB DDR3 (shared with GPU)|
|Onboard Storage||TF card (Max. 64GB) / MMC card slot|
|Onboard Network||10/100 Ethernet RJ45|
| Video Input
||A CSI input connector Camera:
Supports 8-bit YUV422 CMOS sensor interface
Supports CCIR656 protocol for NTSC and PAL
Supports SM pixel camera sensor
Supports video capture solution up to [email protected]
| Video Outputs
||Supports HDMI output with HDCP
Supports HDMI CEC
Supports HDMI 30 function
|Integrated CVBS||Supports simultaneous output of HDMI and CVBS|
|Audio Output||3.5 mm Jack and HDMI|
|Power Source||DC input, USB OTG input don't supply power|
|USB 2.0 Ports||one USB 2.0 HOST, one USB 2.0 OTG|
|LED lights||Power led & Status led|
|Low-level peripherals||40 Pins Header,compatible with Raspberry Pi B+|
|upported operating systems||Android Ubuntu, Debian|